What our White Stain Blocker label says in your language.





THE FRONT OF THE WHITE STAIN BLOCKER CAN

The Vintage Stain Blocker is an innovative primer that prevents stains and tannins from bleeding through your new paint layer, creating a protective sealing coat.


 

Under the Vintage Paint logo you can read :

WHITE STAIN BLOCKER
FOR FURNITURE AND MORE BY JDL NATURALLY

WHITE STAIN BLOCKER  BY JDL NATURALLY

VINTAGE PAINT STAIN BLOCKER is a white adhesive primer for inside use with insulating properties to prevent tannic bleeding of wooden surfaces found in Oak, Mahogany, Merbau, Meranti, Teak, Afzelia.

Also suitable for isolation of soot, nicotine and dry moisture circles.

VINTAGE PAINT STAIN BLOCKER is also applicable to woods that contain ingredients such as chipboard of Meranti and Oak. It has good adhesion on unglazed tiles, plastic, MDF and metal and knots. 

• Easy to process.
• Offers a very good insulation against tannic bleeding /break-through of wooden surfaces.
• Has good adhesion on various surfaces. 


 

MORE INFORMATION

Sustainably produced in The Netherlands by:

LV Holding bv 

Eekhorstweg 4,  7942JC, Meppel, The Netherlands

www.jdlnaturally.com  |  info@jdlnaturally.com

 Tel. 0031619667203

MEANING OF THE ICONS

FE 40 recyclable material

The icon of the three black arrows chasing each other (the Möbius cycle) is the international symbol for waste recycling and this icon specifies that the Vintage Stain Blocker's tin is recyclable.

The numerical codes accompanied by acronyms inside the symbol are associated with different types of material and allow the consumer to recognize them.

FE40 indicates the iron destined for recovery in bins or separate collection containers according to the provisions of local administrations.

MAL-CODE

The MAL-code  is a Danish sign created for professional users which informs you about the possible health risk associated with working with a product. The code is used only in Denmark.

It consists of two numbers attached by a hyphen. The first number indicates those safety measures you have to take as a minimum to avoid breathing fumes from the product’s content of volatile substances. The second number indicates those safety measures you have to take as a minimum to counteract the health risk associated with the product, if it comes into direct contact with the skin or the airways, or if ingested.

The number before the hyphen goes from 00 to 5, and the number after the hyphen goes from 1 to 6. The higher the number, the higher the need for safety precautions.
The Vintage Stain Blocker  is rated with the lowest MAL-code: 00-1.

A+ INDOOR AIR QUALITY

The “Air Label Score” label indicates the level of emission of Volatile Organic Compounds (VOC) into indoor air. It guarantees consumers the best available information and its goal is to limit the emission of volatile pollutants indoors.

The letters indicate the level of emission of the paint in volatile pollutants into the indoor air of a room: the rating ranges from "A+" (the product emits very little) to "C" (the product emits a lot of volatile pollutants). Be aware of any supplier advertising its product as VOC-free.  No paint is completely VOC-free but, it can be only low in VOC.

The A+ label demonstrates that the amount of VOCs produced by the Vintage Stain Blocker is among the lowest and that all indoor air quality standards are met in full.

Indoor air quality plays a crucial role in the health and comfort of homeowners, children, and pets. Air quality can impact our health, comfort, and overall well-being. With the increasing amount of time spent indoors, it has become increasingly important to pay attention to the air quality in our homes.

 

PRODUCT FEATURES

Our VINTAGE STAIN BLOCKER is available in 2 sizes, you can see the content and coverage of the given can at the top as shown below.

700 ml  (23.6 US fl. oz.) -  BIG PROJECT  size is suitable for  8-10 m2 (86-107 ft2)    - depending on the porosity of the surface

200 ml  (6.8 US fl. oz..) -  SMALL PROJECT  size is suitable for  3-4 m2 (32-43 ft2)  - depending on the porosity of the surface

Colour: White

Finish: Matt

Type: Water-based, modified epoxy resin

Drying rate: Dust-dry after 1 hour.

Re-paintable after 12 hours at 23°C / 50% RH. Always dependent on the temperature, humidity, ventilation and applied layer thickness. High humidity and low temperatures negatively influence drying.

Do not process under 15°C/60°F.


USER INSTRUCTIONS 

Stir well before use by making standing circle movements and scraping the bottom of the tin.
The surface must be dry and clean and free of grease.
VINTAGE PAINT STAIN BLOCKER is ready for use.
Apply two layers.
Can be used with all VINTAGE PAINT Natural Paints. 

OTHER INFORMATION

Vintage Paint is an eco-friendly product with max. 10 VOC

The EU limit for this product (cat.A/L): max 30g/1 

Only for the U.S.: Avoid release to the environment. Harmful to Aquatic life. Do not take internally. Keep out of each of children. 

 

DISCOVER MORE PRODUCTS MADE BY JDL NATURALLY: 
Natural Vintage Paint
Natural Antique Wax
Natural Decor Wax
Metallic Effect paint
Primer & Sealer
Ultra Matt Varnish
High Gloss Varnish
White Stain Blocker
Crackle Effect
Effect Paint and Primer
Structure Powder
Aging Powder
Salty Patina Powder
Wallpapers
Stencils
Pattern Rollers
Brushes and more accessories... 

Under the list of JDL NATURALLY products, you see the  QR code  of this label info page with the following text:

Scan the QR code for multilingual label information and user guides: 
DE / DK / EN / ES / FI / FR / GR / HU / IT / NL / SE/ +

Choose another product to read its label info.

Click here.