What our White Stain Blocker label says in your language.

THE FRONT OF THE WHITE STAIN BLOCKER CAN
The Vintage Stain Blocker is an innovative primer that prevents stains and tannins from bleeding through your new paint layer, creating a protective sealing coat.

WHITE STAIN BLOCKER
FOR FURNITURE AND MORE BY JDL NATURALLY
WHITE STAIN BLOCKER BY JDL NATURALLY
VINTAGE PAINT STAIN BLOCKER is a white adhesive primer for inside use with insulating properties to prevent tannic bleeding of wooden surfaces found in Oak, Mahogany, Merbau, Meranti, Teak, Afzelia.
Also suitable for isolation of soot, nicotine and dry moisture circles.
VINTAGE PAINT STAIN BLOCKER is also applicable to woods that contain ingredients such as chipboard of Meranti and Oak. It has good adhesion on unglazed tiles, plastic, MDF and metal and knots.
• Easy to process.
• Offers a very good insulation against tannic bleeding /break-through of wooden surfaces.
• Has good adhesion on various surfaces.

MORE INFORMATION
Sustainably produced in The Netherlands by:
LV Holding bv
Eekhorstweg 4, 7942JC, Meppel, The Netherlands
www.jdlnaturally.com | info@jdlnaturally.com
Tel. 0031619667203
MEANING OF THE ICONS

FE 40 recyclable material
The icon of the three black arrows chasing each other (the Möbius cycle) is the international symbol for waste recycling and this icon specifies that the Vintage Stain Blocker's tin is recyclable.
The numerical codes accompanied by acronyms inside the symbol are associated with different types of material and allow the consumer to recognize them.
FE40 indicates the iron destined for recovery in bins or separate collection containers according to the provisions of local administrations.

MAL-CODE
The MAL-code is a Danish sign created for professional users which informs you about the possible health risk associated with working with a product. The code is used only in Denmark.
It consists of two numbers attached by a hyphen. The first number indicates those safety measures you have to take as a minimum to avoid breathing fumes from the product’s content of volatile substances. The second number indicates those safety measures you have to take as a minimum to counteract the health risk associated with the product, if it comes into direct contact with the skin or the airways, or if ingested.
The number before the hyphen goes from 00 to 5, and the number after the hyphen goes from 1 to 6. The higher the number, the higher the need for safety precautions.
The Vintage Stain Blocker is rated with the lowest MAL-code: 00-1.

A+ INDOOR AIR QUALITY
The “Air Label Score” label indicates the level of emission of Volatile Organic Compounds (VOC) into indoor air. It guarantees consumers the best available information and its goal is to limit the emission of volatile pollutants indoors.
The letters indicate the level of emission of the paint in volatile pollutants into the indoor air of a room: the rating ranges from "A+" (the product emits very little) to "C" (the product emits a lot of volatile pollutants). Be aware of any supplier advertising its product as VOC-free. No paint is completely VOC-free but, it can be only low in VOC.
The A+ label demonstrates that the amount of VOCs produced by the Vintage Stain Blocker is among the lowest and that all indoor air quality standards are met in full.
Indoor air quality plays a crucial role in the health and comfort of homeowners, children, and pets. Air quality can impact our health, comfort, and overall well-being. With the increasing amount of time spent indoors, it has become increasingly important to pay attention to the air quality in our homes.

PRODUCT FEATURES
Our VINTAGE STAIN BLOCKER is available in 2 sizes, you can see the content and coverage of the given can at the top as shown below.
700 ml (23.6 US fl. oz.) - BIG PROJECT size is suitable for 8-10 m2 (86-107 ft2) - depending on the porosity of the surface
200 ml (6.8 US fl. oz..) - SMALL PROJECT size is suitable for 3-4 m2 (32-43 ft2) - depending on the porosity of the surface
Colour: White
Finish: Matt
Type: Water-based, modified epoxy resin
Drying rate: Dust-dry after 1 hour.
Re-paintable after 12 hours at 23°C / 50% RH. Always dependent on the temperature, humidity, ventilation and applied layer thickness. High humidity and low temperatures negatively influence drying.
Do not process under 15°C/60°F.
USER INSTRUCTIONS
The surface must be dry and clean and free of grease.
VINTAGE PAINT STAIN BLOCKER is ready for use.
Apply two layers.
Can be used with all VINTAGE PAINT Natural Paints.
OTHER INFORMATION
Vintage Paint is an eco-friendly product with max. 10 VOC
The EU limit for this product (cat.A/L): max 30g/1
Only for the U.S.: Avoid release to the environment. Harmful to Aquatic life. Do not take internally. Keep out of each of children.
