What our Primer & Sealer label says in your language.





THE FRONT OF THE PRIMER & SEALER CAN

Vintage Primer & sealer is an all-in-one product that can be used:
- as primer before painting
- as finish on non heavy used surfaces
as decoupage transfer medium
Also very suitable for slow bonding and sealing transfers that can still be shifted during application. 


 

Under the Vintage Paint logo you can read :

PRIMER & SEALER
FOR FURNITURE AND MORE BY JDL NATURALLY

PRIMER & SEALER  BY JDL NATURALLY

VINTAGE PRIMER & SEALER is a water-based and environmentally friendly product.
Works both as a PRIMER before painting with Vintage Paint, and as a SEALER after. 


 

APPLICATION

As PRIMER (before painting with Vintage Paint) apply 2 coats of VINTAGE PRIMER & SEALER to use as a stain-blocking primer that prevents bleeding.

As SEALER (after painting with Vintage Paint) it dries to a soft matt finish and protects furniture and walls, painted with Vintage Paint.

For protection of floors and table tops we advise to use VINTAGE ULTRA MATT VARNISH. 

MORE INFORMATION

Sustainably produced in The Netherlands by:

LV Holding bv 

Eekhorstweg 4,  7942JC, Meppel, The Netherlands

www.jdlnaturally.com  |  info@jdlnaturally.com

 Tel. 0031619667203

MEANING OF THE ICONS

FE 40 recyclable material

The icon of the three black arrows chasing each other (the Möbius cycle) is the international symbol for waste recycling and this icon specifies that the Vintage Primer & Sealer's tin is recyclable.

The numerical codes accompanied by acronyms inside the symbol are associated with different types of material and allow the consumer to recognize them.

FE40 indicates the iron destined for recovery in bins or separate collection containers according to the provisions of local administrations.

MAL-CODE

The MAL-code  is a Danish sign created for professional users which informs you about the possible health risk associated with working with a product. The code is used only in Denmark.

It consists of two numbers attached by a hyphen. The first number indicates those safety measures you have to take as a minimum to avoid breathing fumes from the product’s content of volatile substances. The second number indicates those safety measures you have to take as a minimum to counteract the health risk associated with the product, if it comes into direct contact with the skin or the airways, or if ingested.

The number before the hyphen goes from 00 to 5, and the number after the hyphen goes from 1 to 6. The higher the number, the higher the need for safety precautions.
The Vintage Primer & Sealer  is rated with the lowest MAL-code: 00-1.

A+ INDOOR AIR QUALITY

The “Air Label Score” label indicates the level of emission of Volatile Organic Compounds (VOC) into indoor air. It guarantees consumers the best available information and its goal is to limit the emission of volatile pollutants indoors.

The letters indicate the level of emission of the paint in volatile pollutants into the indoor air of a room: the rating ranges from "A+" (the product emits very little) to "C" (the product emits a lot of volatile pollutants). Be aware of any supplier advertising its product as VOC-free.  No paint is completely VOC-free but, it can be only low in VOC.

The A+ label demonstrates that the amount of VOCs produced by the Vintage Primer &Sealer is among the lowest and that all indoor air quality standards are met in full.

Indoor air quality plays a crucial role in the health and comfort of homeowners, children, and pets. Air quality can impact our health, comfort, and overall well-being. With the increasing amount of time spent indoors, it has become increasingly important to pay attention to the air quality in our homes.

 

PRODUCT FEATURES

Our VINTAGE PRIMER & SEALER is available in 2 sizes, you can see the content and coverage of the given can at the top as shown below.

700 ml (23.6 US fl. oz.)  -  BIG PROJECT  size is suitable for  7-10 m` (75-105 ft)  - depending on the porosity of the surface

200 ml  (6.8 US fl. oz..) -  SMALL PROJECT  size is suitable for  3-4.5 m2 (32-48 ft2)  - depending on the porosity of the surface

Colour: Transparent
Finish: Matt
Type: Water-based
Drying rate: The PRIMER & SEALER will usually be dry to the touch after 30 minutes.
If you will be applying several coats, we recommend a drying time of at least 2 hours between each application.

Do not use the product under 10 °C/50 °F. 

USER INSTRUCTIONS 

Stir well before use. The surface should be dry and free of grease.
Apply at least two thin coats with a roller or a brush (thick coats will leave white patches).
For the first coat, dilute the sealer with at least 20% water.
The second coat with at least 10%.
Allow the coats to dry thoroughly, at least 2 hours between each application. 

OTHER INFORMATION

Vintage Paint is an eco-friendly product with max. 15g/I VOC 

Only for the U.S. Avoid release to the environment. Harmful to Aquatic life. Do not take internally. Keep out of reach of children. 

 

DISCOVER MORE PRODUCTS MADE BY JDL NATURALLY: 
Natural Vintage Paint
Natural Antique Wax
Natural Decor Wax
Metallic Effect paint
Primer & Sealer
Ultra Matt Varnish
High Gloss Varnish
White Stain Blocker
Crackle Effect
Effect Paint and Primer
Structure Powder
Aging Powder
Salty Patina Powder
Wallpapers
Stencils
Pattern Rollers
Brushes and more accessories... 

Under the list of JDL NATURALLY products, you see the  QR code  of this label info page with the following text:

Scan the QR code for multilingual label information and user guides: 
DE / DK / EN / ES / FI / FR / GR / HU / IT / NL / SE/ +

Choose another product to read its label info.

Click here.